Sensors
en
45
Switching the drum-care information
signal on/off
You can touch position
4
and use the
˜
button to switch the
ä
Drum Clean
information signal on or off, e.g.
š
-
‚
.
Possible setting values:
H
Sensors
Sensors
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Note:
Place large and small items of
laundry evenly in the drum.
Aqua-Sensors
During the rinse cycle the Aqua sensor
checks the degree of turbidity (turbidity
is caused by dirt and detergent residue)
of the rinsing water. The duration and
the number of rinse cycles depend on
the turbidity of the water.
2
Cleaning and
maintenance
Cleaning and maintenance
:
Warning
Risk of death!
There is a risk of electric shock if touch
live components.
Switch off the appliance and pull out the
mains plug.
Caution!
Fire and explosion hazard!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
The appliance may be damaged!
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
appliance.
Do not use cleaning agents that contain
solvents.
Appliance housing/control
panel
■
Remove the detergent residue
immediately.
■
Wipe the housing and the control
panel with a soft, damp cloth.
■
Do not use abrasive cloths, sponges
or detergents (stainless steel
cleaner).
■
Do not clean the appliance with a
water jet.
0
off
1
on
#
