Troubleshooting
en
49
Fault
Cause and troubleshooting
The spin result is not
satisfactory. The laun-
dry is too wet/too
damp.
Note:
Where possible, mix large and small items in
the drum. Different sized items of laundry distribute
themselves better during the spin cycle.
▶
Start the
Spin
programme.
Detergent residue on
the damp washing.
Detergents may contain water-insoluble substances
that deposit on the laundry.
▶
Start the
Rinse
programme.
Detergent residue on
the dry laundry.
Detergents may contain water-insoluble substances
that deposit on the laundry.
▶
Brush out the laundry after washing and drying.
Home Connect is not
working properly.
Different causes are possible.
▶
Go to www.home-connect.com.
No connection to the
home network.
Wi-Fi is switched off.
▶
"Activating Wi-Fi on the appliance", Page 35
Wi-Fi is activated but a connection to your home net-
work cannot be established.
1.
Ensure that the home network is available.
2.
Reconnect the appliance to the home network.
→
"Connecting the appliance to a WLAN home net-
work (Wi-Fi) with WPS function", Page 33
"Connecting the appliance to a WLAN home net-
work (Wi-Fi) without WPS function", Page 34
Water is leaking out at
the water inlet hose.
Water inlet hose is not correctly/securely connected.
1.
Connect the water supply hose correctly.
→
"Connecting the water inlet hose", Page 15
2.
Tighten the screw connection.
Water is leaking out at
the water outlet hose.
The water outlet hose is damaged.
▶
Replace the damaged water outlet hose.
Water outlet hose is not connected correctly.
▶
Connect the water outlet hose correctly.
→
"Water outlet connection types", Page 15
Odours have formed
in the appliance.
Humidity and detergent residue may promote the
formation of bacteria.
▶
▶
If you are not using the appliance, leave the door
and detergent drawer open so that residual water
can evaporate.