Siemens WM16XK75NL, User Manual

Page: 34 / 64

NLService
Comments
sThe program settings will be
not stored permanently for the
program.
sWhen you use the intelligent dosing
activates or deactivates the
system, the setting is saved.
Remark:Keep the directions for
detergent and care agent →
Page 33
at.
1.
Pull out the detergent drawer.
2.
Fill with detergent.
→
"Detergent drawer", Page 19
3.
Fill with detergent if desired.
13.4 Filling the drum with
laundry
4.
Slide the detergent drawer into the
appliance.
Remark:To avoid creasing, observe the
maximum load of the programs.
→ "Programs", Page 28
13.6 Starting the program
Required:A program is set.
→ "Set program", page 33
Requirements
sThe laundry is prepared and
sorted.
→ "Laundry", Page 32
sThe drum is empty.
▶
onStart/Refill to press.
aThe drum rotates and a
load recognition takes place, which
can take up to 2 minutes, after
which the water flows into the
device.
aThe display shows the program
duration function ready in time. a
After the program end, it shows
display: -0- .
1.
Open the door.
2.
Place the laundry in the drum.
3.
Close the door.
Make sure that no small items of
laundry are caught in the door.
13.7 Adding laundry
13.5 Dosing detergent and care
agent
After the program has started, you
can remove or add laundry
depending on the program status. In programs where intelligent dosing
is not possible or desired, you can
dose the detergent manually.
Required:A program has started.
→ "Starting the program", Page
34
Tip:In addition to the intelligent
dosing, you can also add other
detergents such as stain remover,
starch or bleach to the manual dosing
compartment. Do not add additional
detergent to the manual dosing
compartment to avoid overdosing or
foaming.
1.
onStart/Refill
The device pauses.
to press.
Remark:If you want to add laundry,
follow the instructions on the
display.
→ "Display", page 23
2.
Open the door.
34