Siemens WM16W5H0GC Instruction Manual And Installation Instructions Download Page 46

Page: 46 / 60

Home Connect

Activating/deactivating Wi-Fi

If your appliance is already connected

to your home network, you can activate

or deactivate

Wi-Fi

on your appliance.

Ensure that you are in the Home

Connect menu.

Page 43

Set the programme to position 4.

’©Ÿ

(Wi-Fi function) appears in the

display.

Press

Start/Reload

©Ÿ

appears in the display, Wi-Fi is

activated on the appliance. If

©””

appears in the display, Wi-Fi is

deactivated on the appliance.

Notes

■

If you connect to your home network,

Wi-Fi is activated automatically.

■

If Wi-Fi is activated, the appliance will

not switch itself off automatically.

■

If Wi-Fi is switched off on the

appliance, it is not possible to use

the Home Connect app to start or

control the appliance remotely.

■

If Wi-Fi is switched off and your

appliance was previously connected

to your home network, this

connection will be re-established

automatically when Wi-Fi is switched

back on.

■

If you activate this function, the

energy consumption increases in

comparison to the values specified

in the consumption value table.

Resetting your network

settings

You can reset all of the network

settings.
Ensure that you are in the Home

Connect menu.

Page 43

Set the programme to position 5.

§“†

(reset network settings)

appears in the display.

Press

Start/Reload

¢“†

appears in the display.

Press

Start/Reload

Note:

If you want to operate your

appliance via the Home Connect app

again, you will need to reconnect it to

your home network and to the

Home Connect app.

Summary of Contents for WM16W5H0GC





























































Search results

Summary of Contents for WM16W5H0GC

Reviews:

Related manuals for WM16W5H0GC

Brands by name

Popular brands

Siemens WM16W5H0GC, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WM16W5H0GC

Reviews:

Related manuals for WM16W5H0GC

Brands by name

Popular brands