background image

32

Sensors – Your washing machine is so 

intelligent

Load adjust

Depending on the type of textile and load, the load adjust 

optimally adjusts the water consumption in each programme.

Aqua-Sensor 

depending on model

During the rinse cycle the Aqua sensor checks the degree 

of turbidity (turbidity is caused by dirt and detergent residue) 

of the rinsing water. The duration and the number of rinse cycles 

depend on the turbidity of the water.

Load sensor/Load display

The load sensor detects the load level in the washing machine 

when the door is open. This is indicated by a progressing bar on 

the display panel. 

²

To ensure that the load sensor measures all the laundry, the drum 

must be empty before the washing machine is switched on.

Dosing recommendation

The dosing recommendation indicates a recommended 

detergent dosage as a %, depending on the selected programme 

and the detected load. The indicated % refers to the 

recommendation of the detergent manufacturer.

²

By observing the recommended dosage, you will protect the 

environment and reduce your household costs.

Unbalanced load detection system

The automatic unbalanced load detection system spins the 

laundry several times to ensure even distribution.
For reasons of safety the speed is reduced or does not perform 

a spin cycle if the washing is very unevenly distributed.

²

Distribute small and large items of washing in the drum. 

Faults, 

what to do? 

~

 Page 39

Summary of Contents for WM14Y791EU





























































Reviews: