Troubleshooting NL
Malfunction
Cause and Troubleshooting
Program centrifugal
run does not start.
▶
Make sure that the drain pipe and water drain
feed hose is not kinked or pinched.
The unbalance detection system has aborted the spin
due to uneven distribution of the laundry.
▶
Redistribute the laundry in the drum.
Remark: If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes is more evenly distributed when spinning.
▶
Start the program Centrifuge.
fizzing, hissing
loud.
Water is flushed into the detergent drawer under
pressure.
▶
No error - normal operating noise.
Loud noise during
spinning.
The appliance is not leveled properly.
▶
Adjusting the device
Device feet are not fixed.
▶
Secure the device feet. Setting the appli-
raat
Transport protections have not been removed.
▶
Remove transport locks
Clapping, clattering
in the pump.
A foreign object has entered the pump.
▶
Cleaning the drain pump", page 52
Slurping, rhythmic
suction sound.
Pump is active, the solution is being pumped out.
▶
No error - normal operating noise.
wrinkling.
Spin speed is too high.
▶
For the next wash, set a lower spin
speed in.
The load quantity is too high.
▶
During the next wash, reduce the load
amount of.
The wrong program has been selected for the type of
fabric.
▶
Select a suitable program for the type of fabric.
Detergent or laundry detergent
softer drips from
the cuff and collects
on the door or in the
cuff fold.
Too much detergent/fabric softener in the detergent
drawer.
▶
When dosing the liquid detergent and
fabric softener on the marking in the detergent drawer
and do not dose above that.
63
