Siemens WM14VK0CFG, User Manual And Installation Instructions

Page: 61 / 72

Troubleshooting NL
Malfunction
Cause and Troubleshooting
▶
Redistribute the laundry in the drum. Spin result is
not to satisfaction-
ness. The laundry is
too wet / too damp.
Remark: If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
▶
Start the program Centrifuge.
Detergents can contain water-insoluble substances
Detergent residue on
the damp laundry. which settle on the laundry.
▶
Start the program To rinse.
Unsuitable detergent has been placed in the dosing
container of the intelligent dosing system.
1.
Check whether the detergent used is suitable.
→ "Detergent and laundry care agent",
Page 35
2.
Empty the dosing containers.
→ "Cleaning the detergent drawer",
Page 45
3.
Clean the dosing containers.
4.
Refill the dosing containers.
→
"Filling the dosing container", page 41
Basic dosing amount not set correctly.
▶
When the intelligent dosing is activated, re-
then induce the basic dosing amount
→ Page 42.
Detergent residue on
the dry laundry.
Detergents may contain water-insoluble
substances, which deposit on the laundry.
▶
Brush the laundry after washing and drying.
Unsuitable detergent has been placed in the dosing
container of the intelligent dosing system.
1.
Check whether the detergent used is suitable.
→ "Detergent and laundry care agent",
Page 35
2.
Empty the dosing containers.
→ "Cleaning the detergent drawer",
Page 45
3.
Clean the dosing containers.
4.
Refill the dosing containers.
→
"Filling the dosing container", page 41
Basic dosing amount not set correctly.
61