Siemens WM14VK0CFG, User Manual And Installation Instructions, Page: 42 / 72

NL Intelligent dosing system
15.3 Content of the dosing
container
Remark: To adjust the basic dosing
amount for, re-
passes the steps with .
Remarks
s When you view the contents of the
If the dosing reservoir changes,
the basic dosing for this dosing
reservoir is reset.
s When you use both dosing containers
for liquid detergents, you must
select a dosing container to be used
during washing.
Adjusting the contents of the dosing
container
1.
Press for about 3 s.
2.
Press to set.
a The display shows
ven.
3.
Press set again. to
in te
4.
To finish the setting, wait briefly.
15.4 Basic dosing amount
The basic dosing amount is based on
the detergent manufacturer's
information, the water hardness and
the degree of soiling of the laundry.
Always set a basic dosing amount,
which is geared to a standard load
of 4.5 kg.
→ "Detergent dosage", page 36
Basic dosing amount
To adjust
1.
Press for about 3 s.
a The display shows the set ba-
sizzle dose for .
2.
Press to adjust the setting.
3.
To finish the setting, wait briefly.
42