en
Basic settings
38
3.
Pour liquid detergent
and fabric
softener into the relevant dis-
pensers.
→
Do not exceed the marking for the
maximum fill level when filling.
4.
Close the dispenser cover.
Note:
To prevent the liquid deter-
gent or fabric softener from drying
out, close the dispenser cover im-
mediately after filling.
5.
If required, pour washing aid into
the compartment for manual dos-
ing.
→
6.
Push in the detergent drawer.
7.
15.3 Dispenser contents
Notes
¡
If you change the contents of the
dispenser, the basic dosage for
this dispenser is reset.
¡
If you use both dispensers for li-
quid detergent, you must select a
dispenser which is to be used dur-
ing washing.
You can change dispenser contents
in the basic settings.
→
"Changing the basic settings",
15.4 Basic dosage
The basic dosage depends on the
manufacturer's instructions for the de-
tergent, the water hardness and the
degree of soiling of the laundry.
Always set a basic dosage that cor-
responds to the dosage for a stand-
ard load of 4.5 kg.
You can change the basic dosage for
the dispenser in the basic settings.
→
"Changing the basic settings",
16 Basic settings
You can configure the basic settings
for your appliance to meet your
needs.
16.1 Overview of the basic
settings
Basic setting
Description
end signal
Volume of the
signal emitted
when the pro-
gramme ends
button signal
Volume of the
signal emitted
when the buttons
are pressed
Drum clean ad-
vice
Activate or deac-
tivate the re-
minder to clean
the drum
Language
Changing
the language
content
Specify the dis-
penser content
→
basis
Change the ba-
sic dosage
Summary of Contents for WM14VE00CS
Page 59: ......
