manualshive.com logo in svg

Siemens WM14VE00CS, User Manual And Installation Instructions, Page: 34 / 60

Share
Download
Siemens WM14VE00CS User Manual And Installation Instructions Download Page 34

en 

operation

34

5.

If required, adjust the programme
settings. 
→ 

"Adjusting the programme set-

tings", Page 34

6.

Start the programme. 
→ 

"Starting the programme",

Page 35

13.3 Adjusting the pro-

gramme settings

Requirement:

 A programme has

been set. 
→ 

"Setting a programme", Page 33

▶

Adjust the programme settings. 
→ 

"Buttons", Page 24

Observe the information about op-
erating logic → 

Page 19

.

Notes

¡

The programme settings are not
saved permanently for the pro-
gramme.

¡

The setting is saved if you activate
or deactivate the intelligent dosing
system.

Adjusting additional programme
settings

1.

Press 

možnosti

   to call up addi-

tional programme settings.

2.

Select the programme settings.

3.

Press 

možnosti

   to call up the

main menu.

13.4 Saving the programme

settings

You can save your individual pro-
gramme settings as favourites.

1.

Set the 

oblíbený program

 pro-

gramme.

2.

Press 

 to call up the sub-

menu.

3.

Select a programme. 
→ 

"Operating logic", Page 19

4.

Press 

Main menu

 to call up the

main menu.

5.

If required, adjust the programme
settings. 
→ 

"Adjusting the programme set-

tings", Page 34

a

The programme is saved.

13.5 Loading laundry

Note: 

To prevent creasing, note the

maximum load for the programmes. 
→ 

"Programmes", Page 27

Requirement:

 The laundry is pre-

pared. 
→ 

"Laundry", Page 32

1.

Open the door.
Ensure that the drum is empty.

2.

Place the laundry in the drum.

3.

Close the door.
Ensure that there is no laundry
trapped in the door.

13.6 Adding detergent and

care product

For programmes in which intelligent
dosing is not possible or desirable,
you can add detergent manually.

Note: 

The dosing recommendation is

aimed at the maximum load for the
programme.

Tip: 

In addition to intelligent dosing,

you can also add additional care
product for laundry, e.g. stain re-
mover, starch or bleach, to the
manual dosing compartment. Do not
add any additional detergent to the
manual dosing compartment to avoid
overdosage and/or foaming.

Note: 

Observe the information about

detergents and care products
→ 

Page 33

.

1.

Pull out the detergent drawer.

Summary of Contents for WM14VE00CS





























































Reviews:

No comments