operation
en
35
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.7 Starting the programme
Requirement:
A programme is set.
"Setting a programme", Page 33
▶
Press
start/doplnění
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows the programme
duration or the "Ready in" time.
13.8 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Requirement:
A programme has
started.
→
1.
Press
start/doplnění
.
The appliance pauses.
2.
Open the door.
3.
Add or remove laundry.
4.
Close the door.
5.
Press
start/doplnění
.
13.9 Cancelling the pro-
gramme
1.
Press
start/doplnění
.
2.
Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Rinse/Freshen Up
pro-
gramme.
– If the water level is high, start
the
Spin
programme or select a
suitable programme for draining.
→
3.
Remove the laundry.
→
13.10 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡
Rinse Stop is activated.
→
¡
The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
1.
Set the
Spin
programme or a pro-
gramme for draining the water.
→
2.
Press
start/doplnění
.
13.11 Unloading the laundry
1.
Open the door.
2.
Remove the laundry from the
drum.
13.12 Switching off the appli-
ance
1.
Press .
Summary of Contents for WM14VE00CS
Page 59: ......