NL Troubleshooting
Malfunction
Cause and Troubleshooting
Spin result is
not to satisfaction-
ness. The laundry is
too wet / too damp.
▶
Make sure that the drain pipe and water drain
feed hose is not kinked or pinched.
The unbalance detection system has aborted the spin
cycle due to uneven distribution of the laundry.
▶
Redistribute the laundry in the drum.
Remark: If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes distributes itself better when spinning.
▶
Start the program Centrifuge.
Unbalance control system compensates for
imbalance through reduced spin speed.
▶
Redistribute the laundry in the drum.
Remark: If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes distributes itself better when spinning.
▶
Start the program Centrifuge.
Detergents can contain water-insoluble substances
Detergent residue on
the damp laundry. which settle on the laundry.
▶
Start the program To rinse .
Detergent residue on
the dry laundry.
Detergents can contain water-insoluble substances,
which deposit on the laundry.
▶
Brush the laundry after washing and drying.
At the water supply
feed hose is leaking water.
The water inlet hose is not correctly / firmly
connected.
1.
Connect the water supply hose correctly. Connect
water supply hose
2.
Tighten the coupling properly.
Water is leaking from
the water drain hose.
Water drain hose is damaged.
▶
Replace the damaged water drain hose.
Water drain hose is not connected correctly.
▶
Connect the water drain hose correctly. connection type
for water drainage
60
