manualshive.com logo in svg

Siemens WM14U840 Series, Instruction Manual And Installation Instructions

Share
Download
Siemens WM14U840 Series Instruction Manual And Installation Instructions Download Page 31

Operating the appliance       

en

31

Detergent dosage

Softener dosage

Notes

■

The changes will be applied 

immediately and do not need to be 

confirmed.

■

Putting the appliance in standby 

mode will not undo these changes.

varioSpeed

(

This programme uses extra energy to 

wash your laundry more quickly.
Touch 

varioSpeed

 

(

 to activate or 

deactivate this option.

Note:  

With the 

varioSpeed

 

(

 option 

activated, your laundry will still be 

washed just as effectively by your 

chosen programme as when this option 

is not selected.

eco 

¦

This programme washes at lower 

temperatures over a longer period of 

time to conserve energy.
Touch 

eco

 

¦

 to activate or deactivate 

this option.

Note:  

With the 

eco

 

¦

 option activated, 

your laundry will still be washed just as 

effectively by your chosen programme 

as when this option is not selected.

Start the programme

Touch and hold 

I

 button for 1~2 

seconds, then release the button.
The programme starts and the 

appliance door is locked.
The programme information is shown 

on the touch display while the 

programme is in progress.

Adding more laundry or 

removing laundry

If the programme has already started, 

you will still be able to load more 

laundry or remove some from the drum.

1.

Touch 

I

.

This will pause the programme.

2.

Open the door.

3.

Add more laundry or remove 

laundry.

4.

Close the door.

5.

Touch 

I

.

Notes

■

Do not leave the appliance door 

open for too long when adding more 

laundry, otherwise water may start to 

trickle out from the laundry.

■

For safety reasons, the appliance 

door remains locked when the water 

level or temperature is high, during 

the active oxygen treatment 

(depending on appliance features) 

and while the drum is turning, and it 

is not possible to add more laundry 

during this time. Refer to the 

messages on the touch display.

3

High dosage for particularly dirty 

laundry

2

Medium dosage for moderately 

dirty laundry

1

Low dosage for laundry that is not 

very dirty

Off

i-Dos Auto Dosing deactivated

3

High dosage for very soft laundry

2

Medium dosage for moderately 

soft laundry

1

Low dosage for slightly soft laundry

Off

i-Dos Auto Dosing deactivated

Summary of Contents for WM14U840 Series

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands