Basic operation
en
39
Water hardness
Hardness range
Total hardness in mmol/
l
German degrees in °dH
soft (I)
0–1.5
0–8.4
medium (II)
1.5– 2.5
8.4–14
hard (III)
over 2.5
over 14
Example of a manufacturer's
instructions for detergent
These example values refer to a
standard load of 4–5 kg.
Soiling
Light
Normal
Heavy
Water hardness: Soft/medium 40 ml
55 ml
80 ml
Water hardness: Hard/very
hard
55 ml
80 ml
105 ml
The dosages can be found on the
manufacturer's packaging.
¡
If you are not using manual
dosage, adjust the dosage to the
actual load.
¡
If intelligent dosing is activated, do
not adjust the dosage to the actual
load capacity. The quantity of de-
tergent and fabric softener is auto-
matically calculated via the basic
dosage →
and the
amount of laundry detected. The
basic dosage setting must always
comply with the dosage for a load
of 4.5 kg.
Basic operation
13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Note:
Observe the information on
Requirement:
The appliance has
been correctly installed and connec-
ted.
→
"Installation and connection",
▶
Press .
The switch-on process takes a few
seconds.
a
An audible function test is carried
out.
13.2 Setting a programme
1.
Turn the programme selector and
set the required programme.
→
2.
If necessary, adjust the pro-
gramme settings →
13.3 Adjusting the pro-
gramme settings
Requirement:
A programme has
been set.
→
"Setting a programme", Page 39
▶
Adjust the programme settings.
→
