Operating the appliance
en
21
■
A flashing
NO
symbol, wait until
YES
and
¼
light up.
Do not open the door until
both
the
YES
and the
¼
symbols are lit.
■
A flashing
NO
symbol, it is not
possible to add laundry.
For safety reasons, the washing
machine door remains locked when
the water level or temperature is
high, or while the drum is rotating,
and it is not possible to add laundry.
To continue the programme, press
the
Start
/Reload
!
button. The
programme continues automatically.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1.
Press Start/
Reload
!
.
2.
Select the other programme.
3.
Press
Start
/Reload
!
. The new
programme starts from the
beginning.
Cancel the programme
Programmes at high temperatures:
1.
Press Start/
Reload
!
2.
To cool the laundry: Select
q
Rinse
.
3.
Press
Start
/Reload
!
.
For programmes at low temperatures:
1.
Press Start/
Reload
!
.
2.
Select
0
Spin
or
p
Empty
.
3.
Press
Start
/Reload
!
.
Programme end during rinse
hold
– – –
0
appears on the display panel
and the Start/Reload
!
button indicator
lamp flashes.
To end the programme, set the
programme selector to
0
Spin/
p
Drain
or select a spin speed. Then press the
Start
/Reload
!
button.
Removing laundry/switching
off the appliance
1.
Open the washing machine door
and remove the laundry.
2.
Set the programme selector to
Off
.
The appliance is switched off.
3.
Turn off the water tap.
Note:
Not required for Aqua-Stop
models.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■
Leave the washing machine door
and detergent drawer open so that
any residual water can dry away.
■
Always wait for the end of the
programme, otherwise the appliance
may still be locked. Then switch on
the appliance and wait for it to
unlock.
■
If the display panel goes off at the
end of a programme, energy-saving
mode is active. To activate the panel,
press any button.
