Siemens WM10K160IN Instruction Manual And Installation Instructions Download

Page: 3 / 40

Contents

enWashing machineInstruction Manual and Installation Instructions

Intended use. . . . . . . . . . . . . . . . .4

(

Safety instructions . . . . . . . . . . .5

Electrical safety. . . . . . . . . . . . . . . . . . 5

Risk of injury . . . . . . . . . . . . . . . . . . . . 5

Safety for children. . . . . . . . . . . . . . . . 5

Environmental protection . . . . . .7

Packaging/used appliance . . . . . . . . . 7

Tips on economical use . . . . . . . . . . . 7

Main points in brief . . . . . . . . . . .8

Getting to know the appliance . 9

Washing machine . . . . . . . . . . . . . . . . 9

Control panel . . . . . . . . . . . . . . . . . . 10

Display panel . . . . . . . . . . . . . . . . . . 10

Laundry. . . . . . . . . . . . . . . . . . . .11

Prepare the laundry . . . . . . . . . . . . . 11

Sorting laundry . . . . . . . . . . . . . . . . . 11

Detergent . . . . . . . . . . . . . . . . . .12

Correct selection of detergent . . . . . 12

Saving energy and detergent . . . . . . 12

Overview of programmes . . . . .13

Programmes on the programme

selector. . . . . . . . . . . . . . . . . . . . . . . 13

Starching . . . . . . . . . . . . . . . . . . . . . 15

Dyeing/bleaching . . . . . . . . . . . . . . . 15

Soaking . . . . . . . . . . . . . . . . . . . . . . 16

Programme default settings . . .16

(Temperature) ° C . . . . . . . . . . . . . . 16

(Spin speed)

. . . . . . . . . . . . . . . . 16

(Ready in)

. . . . . . . . . . . . . . . . . . 16

Additional programme settings17

speedPerfect

(

. . . . . . . . . . . . . . . 17

ecoPerfect

. . . . . . . . . . . . . . . . . . 17

Easy Iron

. . . . . . . . . . . . . . . . . . . 17

Operating the appliance . . . . . . 17

Preparing the washing machine . . . .17

Select programme/switch on the

appliance. . . . . . . . . . . . . . . . . . . . . .18

Change the programme

default settings . . . . . . . . . . . . . . . . .18

Select additional programme settings18

Placing laundry into the drum . . . . . .18

Measure and add detergent

and care products . . . . . . . . . . . . . . .19

Start the programme . . . . . . . . . . . . .20

Childproof lock . . . . . . . . . . . . . . . . .20

Adding/removing laundry . . . . . . . . .20

Changing the programme . . . . . . . . .21

Cancel the programme . . . . . . . . . . .21

Programme end during rinse hold. . .21

Programme end . . . . . . . . . . . . . . . .21

Removing laundry/switching off the

appliance. . . . . . . . . . . . . . . . . . . . . .21

Sensors . . . . . . . . . . . . . . . . . . . 22

Automatic load sensing. . . . . . . . . . .22

Unbalanced load detection system . .22

VoltMonitor . . . . . . . . . . . . . . . . . . . .22

Setting the signal . . . . . . . . . . . 23

Cleaning and maintenance. . . . 24

Machine housing/control panel . . . . .24

Drum . . . . . . . . . . . . . . . . . . . . . . . . .24

Descaling . . . . . . . . . . . . . . . . . . . . .24

Detergent drawer and housing . . . . .24

Detergent solution pump blocked . . .24

The drain hose at the siphon

is blocked . . . . . . . . . . . . . . . . . . . . .25

Filter in the water supply blocked . . .25

Faults and what to do

about them. . . . . . . . . . . . . . . . . 26

Emergency release . . . . . . . . . . . . . .26

Information on the display panel . . . .27

Faults and what to do about them. . .28

Summary of Contents for WM10K160IN









































Search results

Summary of Contents for WM10K160IN

Reviews:

Related manuals for WM10K160IN

Brands by name

Popular brands

Siemens WM10K160IN, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WM10K160IN

Reviews:

Related manuals for WM10K160IN

Brands by name

Popular brands