en
Additional programme settings
22
out of the washing machine immediately
after the program has ended.
To continue/end the program
~
Page 27
The maximum speed that can be set
depends on the model and program
that has been selected.
Finished in-time
(
û
,
û
Finish in,
û
Ready in)
Before starting the program
, you can
preselect the program end ("Ready in"
time) in hourly increments (h = hour) up
to a maximum of 24 hours.
To do this:
1.
Select a program.
The program duration is displayed
for the selected program, e.g.
2:30
(hours:minutes).
2.
Press the
Finished in-time
button
repeatedly until the required number
of hours is displayed.
3.
Press the
‹
button.
The door will be locked.
The selected number of hours (e.g.
8
h
) is shown in the display panel and
counts down until the wash program
starts. The duration of the program is
then displayed.
During the timer count-down
, you can
change the preselected number of
hours as follows:
1.
Press the
‹
button.
2.
Use the
Finished in-time
button to
change the number of hours.
3.
Press the
‹
button.
During the timer count-down
, you can
add or remove laundry as required:
1.
Press the
‹
button.
2.
Open the door and add or remove
laundry.
3.
Close the door.
4.
Press the
‹
button.
Note:
The length of the program is
automatically adjusted when the
program is running.
Certain factors can affect the program
length, e.g.:
■
Program settings,
■
Detergent dosage (additional rinse
cycles if required due to foaming),
■
Load size/type of textiles (longer
washing for higher load and for
textiles which absorb more water),
■
Imbalances (e. g. due to fitted
sheets) are offset with several start-
ups of spin cycles,
■
Fluctuations in power supply,
■
Water pressure (infeeding speed).
\
Additional programme
settings
Additional programme settings
You can find an overview of all possible
additional settings on the
supplementary sheet for the installation
and operating instructions.
The settings vary depending on the
model.
speed eco
(
(
¦
,
(
speedPerfect,
¦
ecoPerfect)
Button with two possible settings for
adapting the selected program:
■
speed
(
(
)
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more
energy than the selected program
without the speed setting.
Note:
Do not exceed the maximum
load.
