12
Special programmes
Fluff Clean
This programme is executed to clean the drying circuit of any fluff
deposits. The time at which the programme needs to be run is determined
automatically by the washer-dryer and indicated by the
(
Fluff Clean
)
l
symbol on the display panel. The
l
(
Fluff Clean
) symbol remains lit until
the programme has been successfully completed.
To run the
Fluff Clean
programme, proceed as follows:
Make sure that the drum is completely empty and close the door.
Set the programme selector to
Fluff Clean
.
Press the
Start/Pause
button.
At the end of the programme, the
Fluff Clean
symbol goes out.
You can also run the
Fluff Clean
programme at any time without
prompting from the appliance.
Rinse + Spin
:
An additional rinse cycle with a final spin. If the laundry is to be removed
dripping wet, set the spin speed to
$
(Rinse stop) before starting the
programme
→
page
13.
Empty + Spin
:
Drain the rinsing water following a programme with
$
(Rinse stop)
→
page
13.
Turn the programme selector to
Empty + Spin
.
Set the spin speed to
$
(Rinse stop).
Press the
Start
/Pause button.
or
Drain
and
spin at the desired spin speed:
Turn the programme selector to
Empty + Spin.
Press the
Spin rpm
button repeatedly until the desired spin speed is
set.
Press the
Start/Pause
button.
i