26
Included with the
appliance
On the back of the washer dryer:
– Water drain hose
– Water supply hose
– Mains cable with plug
– Instruction manual and booklet containing after-sales service
addresses
Moisture may remain in the drum following the final inspection which
every washer-dryer undergoes before leaving the factory.
Removing the transport
safety bolts
Unscrew all screws using
the
spanner supplied.
Remove all transport safety bolts completely
and take the mains cable out of the retainers.
Insert the protective
covers.
– Before using the appliance for the first
time, ensure that
all
transport safety bolts
have been removed and kept safe for any
subsequent transport.
– If you need to transport the appliance at a
later date, always refit the transport safety
bolts to prevent damage to the washer-
dryer.
Positioning and
levelling
– Appliance stability is essential to ensure that the washer dryer does not
“creep” during spin cycles.
– The installation area must be firm, clean and level.
– Parquet floors and soft floor coverings, e.g. carpets or foam-backed
floor coverings, are unsuitable.
Number
Description
5
Covers for openings left after removing the transport bolts.
1
Spanner
1
24-40 mm dia. hose clamp for connection to a siphon.
1
Door template
2
Door hinges with screws
