Siemens WG54G200ES, User Manual And Installation Instructions

Page: 38 / 64

en
Basic operation
38
¡
Observe the information about de-
tergents and care products
→
Page 35 .
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
"Detergent drawer", Page 18
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.8 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
inicio pausa+carga
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: "End".
13.9 Adding laundry
Note:
Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 10 .
1.
Press
inicio pausa+carga
.
The appliance pauses.
Note:
If appears, it is not pos-
sible to add laundry.
When goes out, it is possible to
add laundry.
2.
Open the appliance door.
3.
Add or remove laundry.
4.
Close the appliance door.
5.
Press
inicio pausa+carga
.
13.10 Cancelling the pro-
gramme
Note:
Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 10 .
1.
Press
inicio pausa+carga
.
2.
Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the programme.
– If the water level is high, start
the programme or select a
suitable programme for draining.
→
"Programmes", Page 24
3.
Remove the laundry → Page 38 .
13.11 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
1.
Start the programme or select a
suitable programme for draining.
→
"Programmes", Page 24
2.
Press
inicio pausa+carga
.
13.12 Unloading the laundry
Note:
Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 10 .
1.
Open the appliance door.
2.
Remove the laundry.