19
End of the programme
The washing and drying programmes are ended automatically.
appears on the display panel.
Set the programme selector to
Off
.
Remove the washing from the drum.
Leave the door open so that the inside of the washer-dryer can dry out.
Turn off the tap (not necessary on models with Aqua-Stop).
If the spin function was deactivated at the start of the wash cycle,
$
(no final spin = laundry remains in last rinsing water), the washing
programme is automatically stopped after the final rinse. The display
panel shows
alternating with
.
In order to drain the rinsing water and, if required, spin the laundry:
Press the
0
(Spin)
button repeatedly until the required spin speed is
set. The water is drained and the washer-dryer spins the laundry. The
programme is completed when
appears in the display field.
The maximum spin speed depends on the selected wash programme.
If you do
not
wish to spin the laundry:
Press the
0
(Spin)
button until the Rinse Hold option is slected again
(indicator lamp lights up). The pump-out will be run without spin.
The programme is complete when
appears on the display
panel.
Set the programme selector to
Off
.
Remove the laundry.
Leave the door open to allow the inside of the washer-dryer to dry out.
Turn off the tap (not necessary on models with Aqua-Stop).
Childproof lock
w
For preventing the washer-dryer functions that you have set from being
changed inadvertently.
Activate/deactivate:
Press and hold the
Set
button
è
until the Childproof lock symbol
w
starts to flash for 3 seconds.
Press the
Option
button
Ö
within these 3 seconds to activate or
deactivate the Childproof lock.
The symbol
w
lights/disappears when activated/deactivated.
Rinse Hold