Siemens WAX32GH1GB, User Manual And Installation Instructions

Page: 50 / 72

en
Basic settings
50
HU MT NL AT PL PT RO SI
SK FI SE UK NO CH TR
5 GHz WLAN (Wi-Fi): For indoor use only.
Basic settings
Basic settings
You can configure the appliance to
meet your needs.
Overview of the basic settings
Below is an overview of the basic set-
tings on the appliance.
Basic setting Description
end signal Set the volume of the
signal at the end of
the programme.
button signal The volume of the
audible signal emitted
when the buttons are
pressed.
auto power-off Activate or deactivate
the "Automatic switch-
off" function for the
appliance or set the
time after which the
appliance automatic-
ally switches itself off.
→
"Save energy and
conserve resources",
Page 12
Note:
If Wi-Fi is activ-
ated, the appliance
will not switch itself
off automatically.
Drum clean advice Activate or deactivate
the reminder to clean
the drum.
Language Set the language.
Aut. network log-in Connect the appli-
ance to a WLAN home
network (Wi-Fi) with
WPS function
→ Page 46
Basic setting Description
Man. network log-in Connect the appli-
ance to a WLAN home
network (Wi-Fi)
without WPS function.
→
Page 46
Connect app Connect your appli-
ance to the Home
Connect app
→
Page 47 .
Wi-Fi on/off Activate or deactivate
Wi-Fi.
→
"Activating Wi-Fi on
the appliance",
Page 48
→
"Deactivating Wi-Fi
on the appliance",
Page 48
Software update Install the software
update.
→ Page 48
Network settings Reset the network set-
tings.
→ Page 49
energy mngmt. Connect the appli-
ance to the energy
manager.
→
Page 47
Changing the basic settings
1.
To call up the basic settings for
the sub-menu, press and hold both
buttons ⁠
3 sec.
for approx. 3
seconds.
2.
Select the required basic setting.
→
"Overview of the basic settings",
Page 50
3.
Adjust the basic setting.
4.
Press ⁠
3 sec.
to call up the main
menu.