Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Directory
It can store 16 numbers in the directory, and each number can include
20-digits. The incoming phone numbers can also be stored in the
directory.
Be sure the handset or the base is in idle status.
Enter the phone number (maximal 20 digits). Press Delete key to change
the number.
Press the Mem/Prog key and then enter the location the number will be
stored to (01-16).
Browsing lists in the Directory
Be sure the handset or the base is in Standby.
Press the Channel/Select or Search key on the handset or the base station
until “Store” appears on the display.
Press
Ʒ
or
ͩ
key to browse the lists.
Note:
If exceed 12 digits, press the Next key to display other lists.
Inserting a dialing pause
When storing a phone number, press Redial/Pause key to insert a dialing
pause to the phone number (for example, if you need to dial “9” to make
external calls, then insert a dialing pause after “9”). One dialing pause
(about 3 seconds) takes the place of one digit.
Modifying stored phone numbers
You can modify the stored phone numbers referring to the instructions
within the “Directory”.
Storing outgoing phone numbers
Be sure the handset or the base is in idle status.
Press the Redial
ͩ
key to view outgoing records, and “Outgoing Call”
will appear on the display.
Press
Ʒ
or
ͩ
key to browse the records.
Press the Mem/Prog key.
Press the two-digit storing location (01-16).
Note:
Press the Exit key to exit.
14