background image

Published by Siemens Industry, Inc.  2020

Siemens Industry, Inc. 
3617 

Parkway 

Ln. 

     

Peachtree Corners, GA 30092 

Phone: +1 (800) 333-7421  

 

 

 

 

 

[email protected] 

      

usa.siemens.com/versichargeultra 

     

Article No. SIDS-T40088-00-4AUS   

 

 

 

Engineering  Doc  No.  P3REC000100052 

 

 

   

                                                     

Printed in USA                                                                                                                            
All Rights Reserved 
© 2020, Siemens Industry, Inc.                                                                                   

The technical data presented in this document is based on an actual case or on 
as-designed parameters and, therefore, should not be relied upon for any specific 
application and does not constitute a performance guarantee for any projects. 
Actual results are dependent on variable conditions. Accordingly, Siemens does 
not make representations, warranties, or assurances as to the accuracy, currency 
or completeness of the content contained herein. If requested, we will provide 
specific technical data or specifications with respect to any customer’s particular 
applications. Our company is constantly involved in engineering and 
development. For that reason, we reserve the right to modify, at any time, the 
technology and product specifications contained herein.

Summary of Contents for VersiCharge Ultra 175













Reviews: