I/P Transducer Kit
15900-378
November 2021
INPUT
LEADS
7
6
0
-1
1
5
g
ZERO AND SPAN
ADJUSTMENTS
O-RINGS
I/P MANIFOLD
INPUT
GUAGE
REMOVE SCREW
AND SEALING PLATE -
SAVE O-RINGS
UNDER PLATE
PIPE
PLUG
CLAMPING PLATE, EXTERNAL TOOTH
LOCKWASHER AND 8-32 X .375
SLOTTED SCREW
10-32 x 3/8 SLOTTED
HEX HEAD GROUND
SCREW AND CUPPED
TERMINAL WASHER
WIRE CLAMP
SCREW
8-32 X 1/4 BINDING HEAD
WIRE
CLAMP
I/P TRANSDUCER
MOUNTING SCREW
10-32 X 2-1/2
I/P TRANSDUCER
I/P Transducer Kit
ValvePAC is a trademark of Siemens Industry, Inc. All product designations may be trademarks or product names of Siemens
Industry, Inc. or other supplier companies whose use by third parties for their own purposes could violate the rights of the
owners.
Siemens Industry, Inc. assumes no liability for errors or omissions in this document or for the application and use of information
in this document. The information herein is subject to change without notice.
Procedures in this document have been reviewed for compliance with applicable approval agency requirements and are
considered sound practice. Neither Siemens Industry, Inc. nor these agencies are responsible for product uses not included in the
approval certification(s) or for repairs or modifications made by the user.
◼
DO NOT
ADJUST I/P
TRANSDUCER CALIBRATION
SCREWS.
INPUT
GAUGE
I/P Terminals
Left Right
Plus (+) Minus (-)
