Siemens TK 56 series, Operating Instructions Manual

Page: 21 / 106

19
en
Warning
Each time you run the service programme,
you should follow the instructions for
using the cleaning and descaling agents
carefully.
Never interrupt the descaling programme.
Do not drink the liquids.
Never use vinegar or vinegar-based
products.
Never put descaling tablets or other
descaling materials into the duct for
cleaning tablets.
i
The “
S
” symbol flashes while the service
programme is running (approx. 40
minutes).
Important: If there is a filter in the water
tank, it needs to be removed before the
service programme is run.
Starting the service programme
Important: There should be approx. 0.5
liters of water in water tank 1 .
● Switch the appliance to “ eco ” mode.
● Hold down the coffee dispensing button
4
for at least 5 seconds. The appliance
rinses 2 x through the coffee outlet 10 .
† D
lights up on the display.
● Empty and reinsert the trays 0 and 1 .
† 7
lights up on the display.
● Open the cover of the duct 14 for ground
coffee / cleaning tablets.
● Place one cleaning tablet in the duct 14
and close the cover.
†
9
lights up on the display and the
4
button flashes.
● Empty the water tank before filling it with
lukewarm water, add descaling agent and
dissolve completely (total liquid: 0.5 litres).
or
● Pour prepared descaling mixture into the
water tank (total liquid: 0.5 litres).
● Press the
4
button. The descaling
process begins. Duration approx. 10
minutes. The descaling solution flows into
the water tray 1 .
† 8
flashes on the display.
● Place a suitable container (approx. 0.5
litres) under the nozzle 9 .
● Set the dial 8 to
g
/
h
. The descaling
process begins. Duration approx. 5
minutes. The descaling solution flows into
the container.
† D
lights up on the display.
● Empty and reinsert the water tray 1 .
† 9
lights up on the display and the
4
button flashes.
● Empty and clean the water tank 1 , fill
with fresh water up to the “max” mark and
reinsert.
● Place a suitable container (approx. 0.5
litres) under the nozzle 9 .
● Press the
4
button. The cleaning process
begins. Water flows into the container.
† 8
lights up on the display.
● Turn the dial 8 to “ O ”. The cleaning
process begins. Duration approx. 10
minutes. Liquid flows into tray 1 inside
the appliance, then from the coffee outlet.
† D
lights up on the display.
● Empty, clean and re­insert the trays
0
and 1 .
The appliance heats up and is ready for use
again when all four buttons
4
,
5
, eco and
h
light up and remain lit.
Important: If the service programme is
interrupted, e.g. owing to a loss in power,
it is vital that the water tank be emptied,
rinsed and filled with fresh water before
the appliance is used again. Then turn the
appliance on.
● The appliance rinses, liquid flows into
tray
1
.