Siemens TE603, Instruction Manual

Page: 19 / 164

15
en
● Touch
B
to confirm.
Water will now flow through the filter to
rinse it�
● Then empty the drip tray and re-insert�
The appliance is ready for use again�
F Rinsing the filter simultaneously acti-
vates the setting for displaying the
message “
Please change water filter
”�
When this message appears, or at
the latest after two months, the filter
will no longer be effective� It needs to
be replaced for reasons of hygiene
and to prevent a build-up of limescale
(which could damage the appliance)�
If you do not intend to insert a new filter,
select the setting
No filter
and touch
B
to confirm.
F If the appliance has not been used
for a prolonged period (for example,
while you are on holiday), the
existing filter should be rinsed before
the appliance is used again� To do
this, simply dispense a cup of hot
water�
Cleaning and care
Starting the special service programmes�
You can select
Rinse the milk system
,
Descale
,
Clean
or
calc’nClean
�
● Use
I
to choose the desired
programme and touch
B
to confirm
your choice�
● Touch
C
to begin running the
programme�
F
Important: Be sure to take
note of the section on “Service
programmes”�
Info Service programmes
(depending on the type of appliance)
Display how many beverages can still be
prepared before it will be necessary to run
one of the service programmes�
● Use
I
to display
Clean after ---
c
or
Descale after ---
c
�
● Touch
F
to exit from the display�
F
For technical reasons the counter
does not represent a precise number
of cups�
Frost protection
Service programme to prevent frost
damage during transportation and storage�
This programme completely empties the
appliance�
F The appliance must be ready for use
and the water tank 5 must be filled�
● Touch
C
to begin running the
programme�
The appliance empties all its pipes and then
switches itself off�
● Empty the water tank
5
and the drip
tray 17 �