Siemens TE603, Instruction Manual

Page: 15 / 164

11
en
Preparing coffee drinks
The appliance must be ready for use�
● Place a prewarmed cup underneath the
beverage outlet 4 �
● Touch the appropriate symbol to select
the desired drink,
Espresso
or
Coffee
�
The name of the drink and the currently
active values for strength and cup size are
shown in display�
Coffee
regular medium
F You can change the cup size and
coffee strength by touching
D
and
H
� If you select
Ground coffee
,
follow the procedure described under
“Preparation using ground coffee”�
For example:
● Touch
D
repeatedly until the display
shows
large
�
● Touch
H
repeatedly until the display
shows
mild
�
● Touch
C
to begin dispensing
the beverage�
The coffee is brewed and then dispensed
into the cup�
F
You can touch
C
again to
prematurely halt dispensing�
Preparation using milk
This fully automatic coffee machine
possesses an integrated milk system that
enables you to prepare coffee with milk or
milk froth or warm milk alone�
B
Risk of burns!
The upper and lower sections of the
milk system
4b
become extremely
hot� After use, always let them cool
down before you touch them�
F Caution!
Dried milk residues are difficult to
remove, so you should always clean
the appliance after each use (see the
section “Cleaning the milk system”)�
F While milk is being prepared you
may hear a whistling sound� This is
due to the technical nature of the
milk system 4b �
F Tip: For optimum milk froth use cold
milk with a fat content of at least
1�5%�
The appliance must be ready for use�
The milk tube and suction pipe must be
connected�
● Insert the suction pipe 4d into the milk
container�
● Place a prewarmed cup or glass under-
neath the beverage outlet�
Coffee-based drinks with milk
● Touch the appropriate symbol to select
Caffe Latte
,
Latte Macchiato
or
Cappuccino
�
The name of the drink and the previously
specified values for strength and cup size
are shown in display�