IOM-007
Installation Operation Manual for TC3A-107 and Similar EDUs
Page 15 of 19
Figure 10
Image to show inspection holes,clamp ring, C-spanner location holes and alignment key on a
diver plug connector.
Figure 11
Image to show inspection hole, clamp ring mating thread, and keyway on a diver receptacle
connector.
12. TESTING OF EFL’S
•
The appropriate test connector must always be used to make electrical contact during
testing.
•
UNDER NO CIRCUMSTANCES
should a foreign object (such as a screwdriver, test probe,
or crocodile clip) be used as a test connection as this could damage the seals and insulation.
•
Such actions will invalidate the warranty of the connector.
2. Insp Hole
3. Clamp ring
4. Allignment
key
1. C spanner
location holes
1. Viewing Hole
2. Clamp ring mating
thread.
3. keyway
