Siemens TALON Series Technical Reference Manual Download Page 14 | Manualshive

Page: 14 / 50

Siemens TALON Series Technical Reference Manual Download Page 14

TX-I/O Modules

Address Keys

I/O modules are addressed using a TX-I/O address key.

TXIO0062R1

Reset Key

TX-I/O Address Keys.

The keys are available in sets of 24, up to a maximum value of 72 (2 sets of 12, 1-24,

25-48, and 49-72).



The I/O module address is mechanically encoded in the address key.
‒ Without an address key, the module is inactive.

‒ With an address key inserted, the module has full functionality.



Based on the address, the TC Modular or TC-36 configures the I/O module,

indicates which field devices are connected to this module, and which function is

required for the field devices.

CAUTION

The address key must be inserted firmly into the terminal base before swiveling it
into the plug-in module.

1

TXIO0039R1

2

TXIO0040R1

14
Siemens Industry, Inc.

TALON TX-I/O Modules and Island Bus Technical Reference

588-587

CONFIDENTIAL: For internal use only

4/6/2010

«
...
12
13
14
15
16
...
»

Summary of Contents for TALON Series



















































Reviews:

No comments