76
Configuring Advanced Settings
Gigaset SX763 WLAN dsl / en AnnA / A31008-M707-R131-1-7619 / configure_router.fm / 20.07.2006
Sc
hablone 2
005_0
7_2
7
Configuring the DHCP server
The Gigaset SX763 WLAN dsl has a
for which the factory setting is active.
Consequently, the IP addresses of the PCs are automatically assigned by the Gigaset
SX763 WLAN dsl.
ì
To activate the DHCP server, select
On
.
ì
If the DHCP server is active, you can define a
Lease time
determines
the period for which the PCs retain the IP addresses assigned to them without chang-
ing them.
ì
Define the range of IP addresses the Gigaset SX763 WLAN dsl should use to auto-
matically assign IP addresses to the PCs. Define the
First issued IP address
and the
Last issued IP address
.
ì
You can define the name of a domain (Windows workgroup) in the
Domain name
field.
Note:
New settings can only be made after the Gigaset SX763 WLAN dsl has been
rebooted. If necessary, reconfigure the IP address on your PC (including one that
is statically assigned) so that it matches the new configuration.
Note:
u
If the DHCP server for the Gigaset SX763 WLAN dsl is activated, you can configure
the network setting on the PC so that the option
Obtain an IP address automat-
ically
is set up. Further information about this can be found in the section entitled
"Das lokale Netzwerk konfigurieren" on page 127.
u
If you deactivate the DHCP server, you will have to assign a static IP address for the
PCs that use the network settings.
Note:
If you select
Never expires
, the IP addresses are never changed. Activate this
option if you want to make NAT or firewall settings using the IP addresses of the
PCs; otherwise you have to assign static IP addresses to these PCs.
