Siemens Building Technologies
Fire Safety
P/N 315-048733-3
System Status Display with Control
Installation Instructions
Models SSD-C / SSD-C-INTL
INTRODUCTION
The
Model SSD-C/
SSD-C-INTL is an optional FireFinder
module that displays the event status
of a system and has the capability to
control the system remotely from the
PMI. It has four 40 character alphanu-
meric LCD character lines, backlit upon
status change or display toggling. This
module is supervised by the main
panel and also has LEDs and an
optional sounder to indicate the status of the system. The SSD-C has the capability to
store up to 1500 event messages and has pushbuttons to scroll through these events.
Its display is independent from the display on the PMI. During the SSD-C/SSD-C-INTL
initial power up, the SSD-C/SSD-C-INTL is configured in Display-only mode.
The following items are supplied with the SSD-C/SSD-C-INTL:
SSD mounting plate (P/N 300-034289) with the SSD-TB interface board
(P/N 515-034170)
8-pin wiring interface cable (P/N 555-134347)
SSD-C housing (P/N 195-134170) with an SSD-C-main board (P/N 557-034170)
OverlayThe SSC-C has one overlay, the SSD-C-INTL has three overlays.
-
SSD-C overlay (P/N 200-134294 in English)
-
SSD-C-INTL overlays (P/N 200-134751 in French, P/N 200-134752 in
Spanish, P/N 200-134753 in Portuguese)
4 screws to mount the housing to the mounting bracket (P/N 545-634442)
The SSD-C-INTL is used in applications where French, Spanish or Portuguese is the
primary language. It is identical to the SSD-C in all other ways, and will be referred to
in the remainder of this document as SSD-C.
OPERATION
The SSD-C has six LEDs and a sounder to indicate the status of the fire alarm panel.
The LCD indicates the state of a specific event. The SSD-C also has push buttons that
allow the user to scroll through the events list, and/or take control of the system.
The SSD-C can be configured as Display only or with System Control and can be
used in two different vectoring applications: No Vectoring and Queue Vectoring.Refer
to the Programming section on page 7 for information on configuring the system.
Figure 1
SSD-C System Status Display
AUDIBLES
SILENCED
ON
SUPERVISORY
ALARM
RESET
TROUBLE
SECURITY
ON
OFF
ACKNOWLEDGE
SILENCE
UNSILENCE
BUTTON ENABLE
