Siemens SR25ZI11ME, User Manual

Page: 44 / 60

en
Troubleshooting
44
Fault Cause troubleshooting
E:90-01 will light up altern-
ately. Mains voltage is too low. This is not a fault on the appliance.
1.
Contact an electrician.
2.
Have the mains voltage and elec-
trical installation checked by an
electrician.
A different error code ap-
pears in the display window.
E:01-00 to E:90-10 A technical fault is present.
1.
Press .
2.
Unplug the appliance or switch off
the fuse.
3.
Wait at least 2 minutes.
4.
Insert the mains plug of the appli-
ance in a socket or switch on the
fuse.
5.
Switch the appliance on.
6.
If the problem occurs again:
‒
Press ⁠.
‒
Turn off the water tap.
‒
Pull out the mains plug.
‒
Contact Customer Service
→
Page 55 and give the er-
ror code.
Washing results
Fault Cause troubleshooting
Tableware is not dry. No rinse aid used or dosage
set too low.
1.
Add Rinse aid
→
Page 26 .
2.
Set the amount of rinse aid to be
dispensed.
→
"Setting the amount of rinse aid",
Page 26
Programme or programme
option has no drying phase,
or the drying phase is too
brief.
▶
Select a programme with drying,
e.g. intensive, strong or ECO pro-
gramme.
→ Page 17
Some option buttons decrease the
drying result, e.g varioSpeed.
Water collects in recesses of
the tableware or cutlery.
▶
Position tableware at an angle
where possible.