background image

Advanced Features

61

Dynamic DNS Screen

Select 

Advanced

 on the main menu, then 

Dynamic DNS

, to see a screen like the following:

Figure 35: DDNS Screen

Data - Dynamic DNS Screen

DDNS Service

DDNS Service

 

You must sign up first to create a new account before using the
service. The service is free.

 

Click this link to connect to the www.dyndns.org Web site.

 

Your initial password will be E-mailed to you; you can change
this later if you wish.

 

After registration, use the "Create New Host" link (on the
www.dyndns.org Web site) to request a domain name.

DDNS Data

User Name

Enter the "User name" specified at the www.dyndns.org Web site
when you registered.

Password

Enter your current password for www.dyndns.org

Domain

 

Enter your domain name, as allocated at www.dyndns.org.

 

The name should consist only of letters and the hyphen (dash).
Using any other characters may cause problems..

DDNS Status

This message is returned by the DDNS Server at www.dyndns.org

 

Normally, this message should be "Update successful" (current
IP address was updated on the www.dyndns.org server).

 

If the message is "No host", this indicates the host name entered
was not allocated to you. You need to connect to
www.dyndns.org and correct this problem.

Summary of Contents for SpeedStream SS2624




























































































Reviews: