background image

Setup

13

DSL Modems

Connection
Type

Details

Data Required

PPPoE

You connect to the ISP only
when required. The IP
address is allocated auto-
matically.

Username and password.

Note that this is the Username and
password for 

Internet access

, not

for E-mail.

PPTP

Mainly used in Europe.

You connect to the ISP only
when required.

 

PPTP Server IP Address.

 

User name and password.

 

Your IP Address
Check if were you allocated
an IP Address by your ISP.

 

If so, select "Fixed IP
address" in the Wizard,
and enter the details pro-
vided by your ISP.

 

Otherwise, select "Dy-
namic IP address" in the
Wizard.

If your ISP currently requires using PPPoE client software
on your PC, this software is no longer required and should
be disabled or uninstalled.

Other Modems (e.g. Satellite Broadband)

Data

Details

Check

IP Address

There are 2 systems used:

 

Dynamic

 -Your IP

Address is allocated
automatically, when you
connect to you ISP.

 

Static

 - Your ISP

allocates a permanent IP
Address to you.

Were you allocated a specified IP
Address?

If YES, select "Fixed IP address"
in the Wizard, and enter the
details provided by your ISP.

If NO, select "Dynamic IP ad-
dress" in the Wizard.

Summary of Contents for SpeedStream SS2624




























































































Reviews: