Siemens SN95EX56CE, User Manual

Page: 49 / 64

Troubleshooting
en
49
Fault Cause troubleshooting
E:32-00 will light up altern-
ately or indicator for water
supply lights up.
9.
Check the water connection for
leaks.
10.
Restore the power supply.
11.
Switch the appliance on.
E:92-40 will light up altern-
ately. Filters are soiled or blocked.
▶
Clean the filters.
→
"Cleaning filters", Page 44
E:61-03 will light up altern-
ately. Water is not drained. Wastewater hose is blocked
or kinked.
1.
Reposition the wastewater hose
without kinks.
2.
Remove residues.
Siphon connection is still
sealed.
▶
Check the connection to the siphon
and open if necessary.
Cover of the wastewater
pump is loose.
▶
Secure the cover of the "Wastewa-
ter pump "
→ Page 59 so it clicks
into position.
E:61-02 will light up altern-
ately. Wastewater pump is
blocked.
▶
Clean the wastewater pump.
→ "Clean wastewater pump",
Page 59
Cover of the wastewater
pump is loose
▶
Secure the cover of the "Wastewa-
ter pump "
→
Page 59 so it clicks
into position.
E:90-01 will light up altern-
ately. Mains voltage is too low. This is not a fault on the appliance.
1.
Contact an electrician.
2.
Have the mains voltage and elec-
trical installation checked by an
electrician.
A different error code ap-
pears in the display window.
E:01-00 to E:90-10 A technical fault is present.
1.
Press .
2.
Unplug the appliance or switch off
the fuse.
3.
Wait at least 2 minutes.
4.
Insert the mains plug of the appli-
ance in a socket or switch on the
fuse.
5.
Switch the appliance on.
6.
If the problem occurs again:
‒
Press ⁠.
‒
Turn off the water tap.
‒
Pull out the mains plug.
‒
Contact "Customer Service"
→
Page 60 and give the er-
ror code.