Troubleshooting
en
51
Fault
Cause
troubleshooting
Plastic parts are discol-
oured.
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
▶
Only remove large remnants of food
and do not prerinse tableware.
Removable streaks are
present on glasses, glass-
ware with a metallic appear-
ance and cutlery.
Amount of rinse aid to be
dispensed is set too high.
▶
Set the rinse aid system to a lower
setting.
No rinse aid has been ad-
ded.
▶
Detergent residue is present
in the final rinse. Lid of the
detergent dispenser is
blocked by tableware items
and will not open fully.
1.
Arrange tableware in the top basket
tableware so the tab collecting tray
is not obstructed by tableware.
Items of tableware are blocking the
dispenser lid.
2.
Do not place tableware or fra-
grance dispensers in the tablet col-
lecting tray.
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
▶
Only remove large remnants of food
and do not prerinse tableware.
Irreversible clouding of
glassware.
Glasses are not dishwasher-
proof, only suitable for dish-
washers.
▶
Use dishwasher-proof glasses.
Glasses are usually only suitable for
use in a dishwasher, i.e. long-term
wear or long-term changes must be
expected.
▶
Avoid a lengthy steam phase
(standing time after wash cycle
ends).
▶
Use a programme with a lower tem-
perature.
▶
Set the softening system to the wa-
ter hardness.
▶
Use detergent with a glass protec-
tion component.
