Softening SystemNL
1.
Press.
2.
Approx. 3 seconds on
to access the basic settings.
Busy-
a
aThe display shows Hxx. aThe
display shows
reflected
to give.
3.
Just as often on
the display shows H00.
press until
4.
To save the settings, press . for
about 3 seconds
to press.
aThe water softener has been
switched on and the refill
softener salt indicator is
deactivated.
Funnel
1
Fill the water softening salt
reservoir completely with softening
salt. The water in the reservoir is
displaced and flows away.
4.
Fit and close the lid of the
reservoir.
Regenerate the softening
system
Switch off water softening
In order to maintain trouble-free
operation of the water softening system,
the device regularly performs a
regeneration of the water softening
system.
The softening system is regenerated in
all programs before the end of the
main wash cycle. This increases the
running time and consumption values
of, for example, water and electricity.
If the refilling salt indicator bothers
you, for example if you use a
combined dishwasher detergent with
a salt component, you can switch off
the indicator.
Note
To avoid damage to the
appliance, only switch off the
water softening in the following
cases:
†The water hardness is maximum
times 21 °dH and you use a
combined dishwasher detergent
with salt substitutes. According to
the manufacturer's instructions,
combined dishwasher detergents
with salt substitutes can only be
used up to a degree of hardness of
21 °dH without adding softening
salt.
†The water hardness is 0 - 6
softening salt
Overview of the consumption values
when regenerating the
softening system
Here you will find an overview of the
maximum additional runtime and
consumption values when regenerating
the softening system.
Regenerating the softening
system after x washes
6
Additional running time in minutes
More water consumption in litres
More power consumption in kWh
7
5
0.05
°dH. You don't need
to use any.
1
Depending on the
device version
27
Summary of Contents for SN53HS60AE
Page 63: ......
