background image

Detergent

 en

31

Spilled rinse aid can cause ex-
cessive frothing during the wash
cycle.

4.

Close the lid of the dispenser for
rinse aid.

a

The lid clicks into position.

Setting the amount of rinse
aid

If there are streaks or water marks on
tableware, change the amount of
rinse aid.

1.

Press  ⁠.

2.

To open the basic settings, press

 for 3 seconds.

a

The display shows H:xx.

a

The display shows 

⁠.

3.

Press 

 repeatedly until

the display shows the value set at
the factory r:05.

4.

Press   or   repeatedly until the
right amount of rinse aid has been
set.
– A low setting adds less rinse aid

during the wash cycle and re-
duces streaking on tableware.

– A higher setting adds more

rinse aid during the wash cycle,
reduces water marks and im-
proves the drying result.

5.

To save the settings, press

 for 3 seconds.

Switching the rinse aid sys-
tem off

If you find the rinse aid refill indicator
irritating, e.g. when using combined
detergents with a rinse aid compon-
ent, you can switch the rinse aid sys-
tem off.

Tip: 

The function of rinse aid is lim-

ited with combined detergents. You
will generally get better results using
rinse aid.

1.

Press  ⁠.

2.

To open the basic settings, press

 for 3 seconds.

a

The display shows H:xx.

a

The display shows 

⁠.

3.

Press 

 repeatedly until

the display shows the value set at
the factory r:05.

4.

Press   or   repeatedly until the
display shows r:00.

5.

To save the settings, press

 for 3 seconds.

a

The rinse aid system is switched
off and the rinse aid refill indicator
is deactivated.

Detergent

Detergent

Detergent

Find out which detergents are suit-
able for your appliance.

Suitable detergents

Only use detergents that are suitable
for dishwashers. Both separate and
combined detergents are suitable.
For optimum washing and drying res-
ults, use separate detergent, adding
"Special salt" → 

Page 28

 and "Rinse

aid" → 

Page 30

 separately.

Modern, powerful detergents mainly
use a low-alkaline formulation with
enzymes. Enzymes break down
starch and remove protein. Oxygen-
based bleaching agents are generally
used to remove coloured marks, e.g.
tea or ketchup.

Note: 

Follow the manufacturer's in-

structions for each detergent.

Summary of Contents for SN45ZW56CS

































































Reviews: