NLRinse System
2.
Top up the rinse aid up to the max
mark.
– A low setting adds less rinse aid
during the wash cycle, reducing
the streaks on the dishes.
– A higher setting adds more rinse
aid during the wash cycle,
reducing water spots and
improving drying results.
max
5.
To save the settings, press . for
about 3 seconds
to press.
3.
If rinse aid has spilled over, it must
be removed from the rinse aid
container.
Switch off rinse system
Rinse aid spilled over can cause
excessive foaming during the wash
cycle.
If the rinse aid refill indicator bothers
you, e.g. if you use a combined
dishwasher detergent with a rinse aid
component, you can switch off the
rinse system.
4.
Close the lid of the rinse aid
reservoir.
aThe lid audibly clicks into place.
Set the rinse aid amount
Tip:The function of the rinse aid is
limited in combination detergents. You
usually get better results by using
rinse aid.
If streaks or water spots remain on the
dishes, adjust the amount of rinse aid.
1.
Press.
1.
Press.
2.
Approx. 3 seconds on
to access the basic settings.
Busy-
2.
Approx. 3 seconds on
to access the basic settings.
Busy-
aThe display shows H:xx
aThe display shows H:xx
to give.
aThe display shows
to give.
aThe display shows
reflected
reflected
to give.
to give.
3.
Just as often on
until the display shows the
factory-set value r:05.
to press
3.
Just as often on
until the display shows the
factory-set value r:05.
to press
4.
Press or repeatedly until the display
shows r:00.
4.
Press or repeatedly until
elity glossy
suggested.
the desired farm
rinse aid is in
30
