Siemens SN25EI38CM User Manual Download Page 53

Page: 53 / 68

Troubleshooting

Fault

Cause

Troubleshooting

Water marks on plastic
parts.

Due to laws of physics
droplet formation on plastic
surfaces is unavoidable.
After drying water marks are
visible.

▶

Select a more intensive pro-
gramme.

→

"Programmes", Page 19

▶

Position tableware at an angle.

→

"Arrange tableware", Page 34

▶

Use rinse aid.

→

"Rinse aid", Page 29

▶

Set the water softening system
higher.

Wipeable or water-soluble
coatings are present inside
the appliance or on the door.

Detergent substances are
deposited there. These coat-
ings cannot generally be re-
moved with chemicals.

▶

Change your "detergent"

→

Page 31

▶

Clean the appliance mechanically.

White coating is deposited in
the appliance interior.

Set the water softening system cor-
rectly.
In most cases you will need to in-
crease the setting.

Change your detergent if required.

Special salt dispenser is not
screwed tight.

▶

Screw the special salt dispenser
tight.

Stubborn white coatings are
present on tableware, inside
the appliance or the door.

Detergent substances are
deposited there. These coat-
ings cannot generally be re-
moved with chemicals.

▶

Change your "detergent"

→

Page 31

▶

Clean the appliance mechanically.

The hardness range is set in-
correctly or the water hard-
ness is greater than 62 °E
(8,9 mmol/l).

▶

Set the Water softening system to
the water hardness or add special
salt.

3in1/organic/eco detergent
is not effective enough.

▶

Set the Water softening system to
the water hardness and use separ-
ate detergents (proprietary deter-
gent, special salt, rinse aid).

Too little detergent is being
used.

▶

Increase the amount of detergent
used or change "Detergent "

→

Page 31

Washing programme selec-
ted too weak.

▶

Select a more intensive washing
programme.

→

"Programmes", Page 19

▶

Adjust the sensitivity of the sensors.

→

"Sensors", Page 11

Summary of Contents for SN25EI38CM





































































Search results

Summary of Contents for SN25EI38CM

Reviews:

Related manuals for SN25EI38CM

Brands by name

Popular brands

Siemens SN25EI38CM, User Manual

Search results

Summary of Contents for SN25EI38CM

Reviews:

Related manuals for SN25EI38CM

Brands by name

Popular brands