Siemens SN25EI38CM User Manual Download Page 44

Page: 44 / 68

Cleaning and servicing

not have a reminder function, we re-
commend performing Machine Care
every 2 months.

Running Machine Care

Run the Machine Care programme if
the indicator for Machine Care lights
up on the control panel or if advised
to do so by the display.

Notes

Run the Machine Care programme
without any tableware in the dish-
washer.

Only use machine care products
and machine cleaners specially
designed for dishwashers.

Make sure that there are no alu-
minium parts, e.g. extractor hood
grease filters or aluminium pans, in
the interior of the appliance.

If you have not run Machine Care
after 3 washing cycles, the indic-
ator for Machine Care will go out
automatically.

For optimum cleaning perform-
ance, ensure the correct place-
ment of cleaners.

Follow the safety instructions given
on the packagings of the machine
care products and machine clean-
ers.

Activate the "glassZone"
→

Page 25

function.

Remove any coarse soiling in the
interior with a damp cloth.

Clean the filters.

Place the machine care product in
the appliance interior.
Only use machine care products
specially designed for dishwash-
ers.

Pour the machine cleaner into the
detergent dispenser until it is filled
completely.
Do not place any additional ma-
chine cleaner in the appliance in-
terior.

Press ⁠.

Press

⁠.

Machine Care is run.

Once the programme has ended,
the indicator for Machine Care
goes out.

Filter system

The filter system removes coarse
soiling from the dishwashing cycle.

Micro filter

Fine filter

Coarse filter

Cleaning filters

Soiling in the dishwashing water may
block the filters.

After each wash check the filters
for residue.

Summary of Contents for SN25EI38CM





































































Search results

Summary of Contents for SN25EI38CM

Reviews:

Related manuals for SN25EI38CM

Brands by name

Popular brands

Siemens SN25EI38CM, User Manual

Search results

Summary of Contents for SN25EI38CM

Reviews:

Related manuals for SN25EI38CM

Brands by name

Popular brands