background image

Water softening system

 en

25

3.

Note: 

Only use special salt for

dishwashers.

Do not use salt tablets.

Do not use table salt.
Add the special salt to the dis-

penser.

a

Funnel 

1

Fill the dispenser right up with spe-

cial salt. The water in the dis-

penser is displaced and forced

out.

4.

Place the lid back on the dis-

penser and turn to close.

Switching off the water

softening system

If you find the special salt refill indic-

ator irritating, e.g. when using com-

bined detergents with salt replace-

ment substances, you can switch the

salt refill indicator off.

Note

To avoid damage to the appliance, only

switch off the water softening system in

the following cases:

¡

The water hardness is max. 26  °E

and you are using combined deter-

gents with salt replacement sub-

stances. According to manufactur-

ers, combined detergents with salt

replacement substances can gen-

erally only be used up to a water

hardness of 26  °E without adding

special salt.

¡

The water hardness is 0 - 8 °E.

You do not need to use special

salt.

1.

Press  ⁠.

2.

To open the basic settings, press

 for 3 seconds.

a

The display shows Hxx.

a

The display shows 

⁠.

3.

Press 

 repeatedly until the dis-

play shows H00.

4.

To save the settings, press

 for 3 seconds.

a

The water softening system is

switched off and the salt refill indic-

ator is deactivated.

Regeneration of the water

softening system

In order to obtain fault-free function of

the water softening system, the appli-

ance performs regeneration of the

water softening system at regular in-

tervals.

Regeneration of the water softening

system takes place before the end of

the main rinse cycle in all pro-

grammes. It will increase the run time

and consumption values, e.g. water

and electricity.

Overview of consumption values

with regeneration the water

softening system

Here you can find an overview of the

maximum additional run time and

consumption values during regenera-

tion of the water softening system.

Regeneration of the water softening

system after x rinse cycles

6

Additional run time in minutes

7

1

Depending on the appliance specifications

Summary of Contents for SN23HW64AG





























































Reviews: