Softening SystemNL
salt component, you can switch off
the softening salt indicator.
10.5 Regenerating the
softening system
Remark
To avoid damage to the
appliance, only switch off the
water softening in the following
cases:
sThe water hardness is max.
times 21 °dH and you use a
combined dishwasher detergent
with salt substitutes. According to
the manufacturer's instructions,
combined dishwasher detergents
with salt substitutes can only be
used up to a degree of hardness of
21 °dH without adding softening
salt.
sThe water hardness is 0 - 6
°dH. You do not need to use
softening salt.
In order to maintain trouble-free
operation of the softening system, the
device regularly performs a
regeneration of the softening system.
The softening system is regenerated in
all programs before the end of the
main wash cycle. This increases the
running time and consumption values
of, for example, water and electricity.
Overview of the
consumption values
when regenerating the
softening system
Here you will find an overview of the
maximum extra runtime and
consumption values when
regenerating the softening system.
1.
Press.
2.
Approx. 3 seconds on
to access the basic settings.
pressure-
Regenerating the
softening system after x
washes
6
aThe display shows Hxx. aThe
display shows
to give.
3.
Just as often on
the display shows H00.
4.
To save the settings, press . for
about 3 seconds
to press.
aThe water softener has been
switched on and the refill
softener salt indicator is
deactivated.
Additional running time in
minutes
7
5
0.05
reflected
More water consumption in
litres
press to
More power consumption in
kWh
The indicated consumption values
are laboratory measured values
which are determined according to
the currently applicable standard and
on the basis of the Eco 50° program
and the factory-set water hardness
value of 13 - 16 °dH.
27
