background image

en

13

Warnings

Do not place small parts for washing
in the tablet collecting tray 

22

; this

prevents the tablet from dissolving
evenly.
If you want to add more utensils after
the programme has started, do not
use the tablet collecting tray 

22

as a handle for the upper basket.
The tablet could already be there and
you will touch the partially dissolved
tablet.

Note

You will obtain optimum rinsing and
drying results by using solo detergents
and applying salt and rinse-aid
separately. 
f programmes are short, tablets may not
have full cleaning effect due to different
dissolving properties and there may
even be undissolved detergent residue.
It is recommended to use washing
powder for these programmes.
The Intensive programme (on some
models) requires one tab only. When
using washing powder, you can apply
some of this cleaning agent to the
inside of the appliance’s door.
Even if the rinse-aid and/or salt refill
indicator is lit, the rinse programme will
run correctly if combined detergents
are used (when using combined
detergents, add rinse-aid at a water
hardness above 21 

_

dH – see chapter

entitled “Rinse-aid”).
If you switch from combined detergents
to solo detergents, ensure that the
water softening system and amount
of rinse-aid have been set to the correct
value.

Downloaded from DishWasher-Manual.com Manuals

Summary of Contents for SN 56M531





























Reviews: