Siemens SMP16-CPU06 Series Manual Download

Page: 17 / 20

SMP16-CPU06x

Initial Commissioning

(4)J31069-D2085-U001-A2-7618

3.2

Layout and Special Wiring of the Bus Backplane

3.2.1

SMP16-CPU065

Wire required interrupts for (SMP16) I/O

boards.

Wire required DMA channels for (SMP16)

I/O boards.

Wire special signals for (SMP16) I/O boards

(e.g., AEN).

Connect backup battery to bus backplane

(SMP16 or IPCI).

End

Layout and special wiring of the bus backplane

SMP16-CPU065:

Wire power supply on SMP16 bus backplane.

Install SMP16-CPU065 CPU board and mass

storage insert for IPCI system in the system

rack.

Install and wire IPCI bus backplane.

Set V I/O to 3.3 V.

Connect SMP16-CPU065 CPU board to mass

storage insert for SMP16 system, and install

both together in the system rack.

Yes

Use PS adapter (5 V only).

Operation with

IPCI backplane?

PS 330 1) in

system?

Insert F2/F4 fuses.

Yes

1) PS 330 is required if PCI boards need 3.3 V.

Summary of Contents for SMP16-CPU06 Series


















Search results

Summary of Contents for SMP16-CPU06 Series

Reviews:

Related manuals for SMP16-CPU06 Series

Brands by name

Popular brands

Siemens SMP16-CPU06 Series, Manual

Search results

Summary of Contents for SMP16-CPU06 Series

Reviews:

Related manuals for SMP16-CPU06 Series

Brands by name

Popular brands