manualshive.com logo in svg

Siemens SLI-5300-I, Quick Start Manual, Page: 7 / 28

Share
Download
Siemens SLI-5300-I Quick Start Manual Download Page 7

7

Step 3:
USB driver installation

The USB driver is only working on the following operating system (OS):
Windows 98, Windows 98SE, Windows ME, Windows 2000 and Windows XP.

If your computer is NOT equipped with an Ehternet interface you have to install first the USB
driver in order to be able to configure your Wireless IAD Router. For the USB driver installation
proceed as follows: 

Windows 98 users need the Windows 98 CD-ROM to complete the 
installation.

1

. Insert the SIEMENS installation CD-ROM in your CD-ROM drive.

The CD will be startet automatically.

In case the “setup wizard” does not start automatically, open a 

Run

window via

Start --> Run

and enter the path x:\USB_Driver\windows\setup.exe, where 

x

repre-

sents the drive letter of the CD drive.

2

. Click on 

Run

or

Setup.

3.

Connect the USB cable to your Wireless IAD Router. The driver will be installed auto-
matically.

Note for Windows 98 users: If prompted, you need to insert the Windows 98 CD-
ROM in your CD-ROM drive to complete the installation.

4.

You will be asked whether the PC should be restarted. Click on 

Close

. 

5.

Click on 

Finish

.

Summary of Contents for SLI-5300-I





























Reviews:

No comments