Siemens SIWAREX WL200 Series Operating Instructions Manual Download Page 9

Page: 9 / 102

SIWAREX WL200
Operating Instructions, 07/2016, A5E02199611B-03

Safety instructions

2.1

Prerequisites for safe use

This device left the factory in good working condition. In order to maintain this status and to

ensure safe operation of the device, observe these instructions and all the specifications

relevant to safety.
Observe the information and symbols on the device. Do not remove any information or

symbols from the device. Always keep the information and symbols in a completely legible

state.

Symbol Explanation

Consult operating instructions

2.1.1

Laws and directives

Observe the test certification, provisions and laws applicable in your country during

connection, assembly and operation. These include, for example:

●

National Electrical Code (NEC - NFPA 70) (USA)

●

Canadian Electrical Code (CEC) (Canada)

Further provisions for hazardous area applications are for example:

●

IEC 60079-14 (international)

●

EN 60079-14 (EC)

2.1.2

Conformity with European directives

The CE mark on the device is a sign of conformity with the following European directives:

Electromagnetic compatibil-

ity EMC

2014/30/EU

Directive of the European Parliament and of the Council on the

approximation of the laws of the Member States relating to elec-

tromagnetic compatibility and repealing Directive 89/336/EEC.

Atmosphère explosible

ATEX

2014/34/EU

Directive of the European Parliament and the Council on the

approximation of the laws of the Member States concerning

equipment and protective systems intended for use in potential-

ly explosive atmospheres.

The standards applied can be found in the EC declaration of conformity for the device.

Summary of Contents for SIWAREX WL200 Series







































































































Search results

Summary of Contents for SIWAREX WL200 Series

Reviews:

Brands by name

Popular brands

Siemens SIWAREX WL200 Series, Operating Instructions Manual

Search results

Summary of Contents for SIWAREX WL200 Series

Reviews:

Brands by name

Popular brands