Faults and Alarms
The key has been programmed as a Fault Acknowledgment input. Most faults not requiring
a power cycle can be acknowledged by pressing the key.
System Faults: faults that will cause the drive to shut down and remain down until the condition
causing the fault has been cleared. Once the condition has been cleared, the fault must be
acknowledged.
System Alarms: alarms that will not affect the functioning of the Drive but only be displayed.
These will continue to be displayed until the condition clears. Once the condition is cleared, the
alarm will clear from the display.
Installing
4.2 Electrical installation for servo driven models
SITRANS WW100
Operating Instructions, 06/2018, A5E33560618-AC
21
