Siemens SITRANS TH320 Operating Instructions Manual Download Page 173

Page: 173 / 236

9.5.1.4

User PIN parameter

Used to change the User PIN.

Setting range:

1 to 65535

Factory setting:

2457

See also

Parameters and functions (Page 133)

9.5.2

Locking the SITRANS TF device

9.5.2.1

Introduction

The following options are available to lock the device:

• Enable write protection using switch.

• Enable write protection using the User PIN.

• Enable write protection using the button lock.

Write protection

Sym‐
bol

Read measured values on
the display

Read parameters on the
display

Change parameters
via the device with
display

Switch enabled

Yes

User PIN

enabled

Yes

Yes, after input of the
user PIN

Button lock enabled

Yes

The user PIN is factory set to 2457 in the device. When delivered, write protection is disabled

using the user PIN.

Devices with functional safety
To enable functional safety, first enable the User PIN.

9.5.2.2

Enable write protection with write protection switch

Introduction

The write protection switch is used for enabling write protection.

Parameter assignment

9.5 Locking the device

SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
Operating Instructions, 05/2020, A5E41864807-AB

173

Summary of Contents for SITRANS TH320













































































































































































































































Search results

Summary of Contents for SITRANS TH320

Reviews:

Related manuals for SITRANS TH320

Brands by name

Popular brands

Siemens SITRANS TH320, Operating Instructions Manual

Search results

Summary of Contents for SITRANS TH320

Reviews:

Related manuals for SITRANS TH320

Brands by name

Popular brands